EMT Practice Test

1. Question Content...

---

Question1: You are designing a Fibre Channel storage solution for a customer who is currently attaching all hosts through the Ethernet and the TCP/IP protocol.
What is an advantage of choosing Fibre Channel over TCP/IP?

Question2: A customer has almost reached the maximum number of domain IDs in a B-series, Fibre Channel SAN fabric. The company has also recently acquired another company and needs to integrate their C-series Fibre Channel SAN to be able to share the SAN infrastructure.
Which feature should you enable on the C-series, Fibre Channel edge switches to meet these requirements?

Question3: Which HPE storage management tool allows you to monitor the physical layer of a SAN in real-time including optical parameters?

Question4: A customer has a multi-site environment and plans to consolidate file-and-block-level data. A proof of concept is arranged to familiarize the customer with HPE 3PAR StoreServ File Persona functionality.
Which statement is true when failing over file-level data between the arrays?

Question5: What must be done before demonstrating Recovery Manger Central Express Protect?

Question6: You are planning a multi-site HPE StoreVirtual environment. The customer wants to use two VMware vSphere hosts at each datacenter.
Which StoreVirtual OS technology should be implemented as part of your plan to reduce network traffic between the sites?

Question7: Which tool should you use to quickly determine HPE 3PAR StoreServ hearth and performance?

Question8: What should be considered before using Jumbo Frames for iSCSi network traffic? (Select two.)

Question9: You are designing a solution involving HPE 3PAR storage for a customer. The customer's business is experiencing significant growth, which requires them to invest in a highly-available storage solution. The customer has already invested in two separate data centers, but cannot initially afford to purchase two systems. The solution must be capable of providing complete local hardware redundancy. In the near future, the solution will be expanded to be geographically independent, and storage systems will be located in both data centers.
Which HPE 3PAR storage system feature could be an essential advantage to this customer's business case?

Question10: A storage architect is reviewing a proposed design for an HPE 3PAR StoreServ deployment. The array must be installed in a co-location facility in facility-supplied-and-managed racks. The storage architect has determined that service clearances and power are adequate. The proposed design is storage-centric and will require two racks to accommodate all the disk enclosures.
What should the storage architect consider when validating the design?

Question11: Which technology allows HPE to maximize available capacity utilization of SSD drives?

Question12: Which HPE backup product enables data-at-rest encryption?

Question13: You are designing an HPE 3PAR StoreServ environment using HPE Smart SAN Which solution components are supported? (Select two.)

Question14: Which Statement is correct about designing a Flat SAN solution using an HPE 3PAR StoreServ storage system?

Question15: You are presenting an HPE 3PAR solution to a new customer. Your proposal includes a transparent failover capability of applications between data centers. The customer has concerns about returning service to the initial configuration and direction of data flow (failback) following a failover event.
What should you explain to the customer to address this concern?

Question16: You design and size an HPE StoreVirtual solution for an SMB customer environment according to these requirements.
-High availability between two data centers is needed
-3 TB of data should be replicated
-2 x 1 Gb/s links are needed between Sites A and B
-A round trip time of 1.8 ms is needed between Sites A and B
-A third site, Site C, is needed for Failover Manager (FOM) connected with 100 MB/s.
There is a latency of 55 ms between Site C and the other sites. Which potential issue should be discussed with the customer before proposing the HPE StoreVirtual solution?

Question17: As part of solution tuning, you want to add online, application-consistent snapshots to a customer's environment.
Which tasks must be performed? (Select two.)

Question18: Which information should be collected and analyzed when discovering customer expectations for replication performance? (Select two.)

Question19: A customer with multiple Oracle databases reports that users are experiencing slow application response time. You need to create an optimized solution for this customer. You have already done database performance monitoring using Oracle AWR, server and storage performance monitoring. You discover that there is a high I/O wait, and the average I/O latency is ~30 ms, which is causing slow response times.
Which solution should you propose to address the performance problem?

Question20: During a meeting with a logistics service provider, the CFO and CIO complain about their existing business intelligence (BI) solution because of its unsatisfactory performance. The CFO is focused on a high ROI and low TCO for the new storage solution. The design parameters to size solution are:
- 30K IOPS
- 4 TB database size
- VMware vSphere used as Hypervisor
Which HPE 3PAR StoreServ storage configuration should you propose?

Question21: Your customer has a 10-node StoreVirtual cluster split between 2 sites that are 1 km apart and are connected by a redundant pair of dark fiber links. The latency is far below 2 ms. Inside the Centralized Management console. 2 sites are created and the appropriate servers and storage systems are assigned to each site.
What should you suggest to your customer when following the best practices tor quorum voting algorithm?

Question22: You need to quickly determine if a software upgrade is available for an HPE 3PAR StoreServ system.
Where can you locate this information?

Question23: A customer has a multi-site, 10-node HPE StoreVirtual solution. What should be configured to ensure that application servers connect to storage systems located in the same site to get their data?

Question24: You are proposing an HPE 3PAR StoreServ solution to a new customer who has never owned HPE Storage products. The customer is interested in migrating their data from the existing solution with minimal service impact.
Which HPE 3PAR StoreServ feature option should you introduce to this customer?

Question25: DRAG DROP
When designing an HPE StoreOnce POC with Catalyst using Symantec NetBackup, you need to know which products require licenses.
Match each product to its licensing requirements.
Select and Place:

Question26: HOTSPOT
The exhibit shows the 4 types of StoreVirtual Network RAID 0, 10, 10+1 and 10+2. A customer has three sites and needs a copy of data at each site. Click on the Network RAID level that you should recommend.
Hot Area:

Question27: Which additional value should you focus on during a solution presentation for an HPE 3PAR StoreServ system using 3.84 TB cMLC SSD drives to appeal to the interests of the company's CFO?

Question28: With regard to converged infrastructure, how does the HPE Converged Storage strategy view a customer's IT infrastructure? (Select two.)

Question29: You are working on a multi-site, high availability proposal and are recommending that the customer order two HPE 3PAR StoreServ 8000 systems.
In addition to the two arrays, which additional business value option can you add to the proposal to the CIO?

Question30: You size a Remote Copy solution for an HPE StoreServ customer. Which best practice should be implemented concerning Virtual Volumes (VVs)?

Question31: A customer's business needs 24 x 7 uptime and highest data availability. In the past, the customer has experienced revenue loss from several outrages during firmware upgrade processes with non-HPE products due to temporary loss of access to disk enclosures. There is a need for 80 TB of Tier-0 storage.
You propose cage availability in the new design, using an HPE 3PAR StoreServ 2-node system containing
80 x 1.92 TB cMLC SSD drivers.
When following HPE best practices, how many additional enclosures should be included in the system?

Question32: At which level is an HPE 3PAR StoreServ deduplication performed?

Question33: You are working with a junior storage administrator to document an existing SAN implementation. You must determine if an HPE 3PAR StoreServ 7000 is cabled correctly. The admin only has the 3parcust credentials.
How can you verify that the array is correctly cabled?

Question34: You are talking to a prospective customer at a medium-to-large enterprise company about an upcoming storage refresh project for their legacy architecture storage platforms. The customer mentions that as the size and types of workloads grew on their present storage arrays, they got slower in terms of IOPS and throughout in a few cases, this forced them to purchase additional arrays to off-load some of the workload.
They noticed the same impact to performance when they enabled array-based replication.
Which HPE 3PAR StoreServ architecture feature will solve these issues?

Question35: You are designing an iSCSI solution for a customer with one data center, who is investing in a second data center that will be ready in the near future. The networking infrastructure of the current data center is generally sufficient for use with an iSCSI storage solution, but it is from a different vendor. The new data center will be equipped with current HPE Networking switches.

Question36: When network constraints are an issue, what is the benefit of the Rest API, when compared to other well- known interface methods, that should be presented to a customer to correctly position HPE OneView?

Question37: What happens during the fabric login (FLOGI) during the Fibre Channel registration process? (Select two.)

Question38: A customer wants to implement asynchronous replication to a third site that is 450 miles (725 kilometers) from the company's main site. Which method should be used to size transfer rates and times for Remote Copy in this HPE StoreVirtual environment?

Question39: Which benefit of the REST API when compared to other well-known interface methods should be presented to a customer to correctly position HPE OneView?

Question40: You are demonstrating management of HPE 3PAR StoreServ arrays using HPE OneView. When you attempt to add an array, you cannot attach to it. What must you do to resolve this problem?

Question41: You begin your first presentation to a customer by positioning HPE OneView as a converged management tool. The customer requires the use of the VMware vSphere API Storage Awareness (VASA) integration in their future management solution.
Which HPE storage products can be used in your design to support this customer's needs? (Select two.)

Question42: Which resource can be used to verify storage system support when using HPE FlexFabric 5900CP switches in a solution design?

Question43: A customer purchased an HPE 3PAR all-flash array to accelerate the company's databases. The customer is concerned about the risk of data loss. Synchronous replication is currently being used, but it is causing slow I/O due to limited network bandwidth and latency, both of which cause application slowdown.
Which alternative solution should you propose to address the issue?

Question44: You are planning an HPE StoreVirtual architecture based on a customer's physical site configuration. The customer has two physical sites and wants to span the cluster between them and requires that all sites should be peers.
What should be done to meet this customer's requirements?

Question45: Your customer is concerned about downtime during storage system upgrades.
Which method of technology addresses this concern when using an HPE 3PAR StoreServ solution?

Question46: A customer wants to lower operational costs by automating Brocade SAN Fabric Zoning to their HPE
3PAR StoreServe array. Which HPE tools can do this for your customer? (Select two.)

Question47: When comparing competitor solutions with your HPE 3PAR StoreServ solution design, which features should you compare?

Question48: Which requirements must be considered when designing and sizing an HPE 3PAR StoreServ environment for periodic asynchronous replication?

Question49: Which object is the unit of failover for HPE 3PAR StoreServ File Persona?

Question50: A customer needs a disaster- tolerant replication solution for its Oracle database. The database consists of only one 500 GB volume. You recommend a Remote Copy solution based on HPE 3PAR StoreServ 8200 systems.
Which statement is correct when using multiple RCIP or Fibre Channel ports for this design?

Question51: The demonstration of iSCSI Persistent Ports during an HPE 3PAR StoreServ proof of concept fails. What is a possible cause of failure?

Question52: While preparing to demonstrate SSMC functionality with an HPE 3PAR StoreServ 7400, you notice that the System Reporter templates for the PoC system are different from those you have IT Certification Guaranteed, The Easy Way! seen for other arrays. While examining the SSMC User Guide, you discover that a System Reporter license is still needed for some System Reporter functionality in SSMC
Which SSMC System Reporter functionality requires the array to have a System Reporter license? (Select two.)